ifm electronic Fields Fast-Response Temperature Sensors |
|
|
|
|
Wednesday, 16 May 2007 |
Reaction times as quick as one second are characteristic of the TA3 range of temperature sensors from ifm electronic. Suiting use in oil or hydraulic lines on stationary applications but also in mobile vehicles and in small pipes where space is limited, the TA3 utilizes high-precision class A Pt elements for temperatures ranges between 0...140°C or -10...150°C. The excellent response time of the sensors is only 1 s for T05 and 3 s for T09. Options for connection with the TA3 are a standard 4-20 mA signal proportional to the temperature, or alternatively an integrated connection to AS-interface via a built-in chip. The integrated G1/4 thread ensures easy mounting without further adaptation. The completely sealed and welded housing ensures not only protection rating IP 69 K but also high mechanical stability....more  (0) Comments |
True North Technologies Introduces On-Board Calibration Of Electronic Compass |
|
|
|
|
Wednesday, 16 May 2007 |
|
True North Technologies has announced the introduction of onboard hard-iron calibration to the Revolution GS, a strap-down electronic compass designed for commercial, industrial, and military users. Embedded in the firmware of the Revolution GS are routines to collect and analyze magnetic calibration data. A least-squares algorithm is implemented to compute hard-iron offsets that optimize accuracy....more (0) Comments |
|
Universal Glow Plug Sensor Simplifies Indicator Measurements |
|
|
|
|
Wednesday, 16 May 2007 |
|
Kistler is now offering the Type 6056A pressure sensor for use in glow plug adapters. This new highly precise M5 size sensor with its tried-and-tested measuring element has a miniaturized plug connection to permit installation deep inside the glow plug adapter. Thanks to this innovation, many different glow plug adapters can be fitted with a single type of standard-length pressure sensor. This simplification facilitates the preparation of indicator measurements, reduces the need to keep stocks of sensors in various lengths and shortens delivery times. The use of glow plug adapters permits cylinder pressure measurements to be taken without need for a separate measuring bore. The adapter is screwed into the existing bore of the original glow plug. Thus, glow plug adapters use the existing bore, allow a sensor to be mounted simply without need for an additional indicator bore and permit pressure measurements to be taken close to the combustion....more |
|
In-Situ Releases Two Water Level Meters |
|
|
|
|
Wednesday, 16 May 2007 |
|
In-Situ announces the release of the Level Tape 100 and Level Tape 200 water level meters for level measuring in wells or bore holes designed for long lasting, accurate depth measurements...more (0) Comments |
|
HBM Inclusive Software Package Excites Measurement Engineers |
|
|
|
|
Wednesday, 16 May 2007 |
|
HBM's catmanAP is an integrated software package for acquiring, visualizing, and analyzing measurement data that has several new modules to enhance the easy-to-use catmanEasy base module. EasyMath, EasyPlan, EasyLog, EasyScript, AutoSequence, and video analysis are all included in the software. EasyMath provides many mathematical functions for evaluating measurement data while EasyPlan simplifies the preparation of measurement tasks without having to connect an amplifier. EasyLog is used with the MGCplus amplifier system to automatically save measurement data to a Flash card or hard disk and EasyScript creates customized scripts for individual measurement tasks. Each of these new modules allows the software to be quickly and easily programmed for special solutions with customized functions....more (0) Comments |
|
FISO Technologies Introduces Signal Conditioner Modules |
|
|
|
|
Wednesday, 16 May 2007 |
|
FISO Technologies, a subsidiary of Roctest Ltd, introduced a new generation of optical-fiber signal conditioner modules, combined with an EVOLUTION table-top platform with significantly enhanced performance and flexibility. The FPI-HR signal conditioner modules are designed in a unique configuration which makes them suitable for laboratory and original equipment manufacturer (OEM) applications. Each optical module is integrated inside a housing shell providing system protection and ease of integration for any OEM equipment. In addition, each module includes a RS-232 and a RS-485 communication port as well as analog outputs (0 to 5V or 4 to 20mA)....more (0) Comments |
|
|
|
<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
|
| Results 1 - 10 of 1142 |
